Vibrant 4 Ply Reinforced Silicone 90 degree Transition Elbow - 2.5in I.D. x 3in I.D. (BLACK)

Rated for temperatures ranging from -65°F to 350°F

90 Degree Reducer Hose Coupler; 2.5 in. Inlet ID; 3 in. Outlet ID; 4 in. Leg Length From Tangent; 3 in. Centerline Radius; 35 PSI Maximum Operating Pressure; Black; Recommended Products: 1st Choice PN: 2793, 2nd Choice PN: 2609, 3rd Choice PN: 2867, 4th Choice PN: 12154, 5th Choice PN: 12890

• Capable of withstanding extreme temperatures and heavy duty pressure conditions without swelling or bursting
• Rated for temperatures ranging from -65 F to 350 F
• Hand wrapped and feature 4-ply reinforcement
• Meets or exceeds SAE J20 specifications
• Suitable for coolant service
• 4 Ply Reinforced Silicone
• 1 Year Limited Warranty
• UV and Ozone resistant

Vibrant Performance Aramid Reinforced Silicone 90 Degrees Transition Elbows feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75 Degrees F to 392 Degrees F (-60 Degrees C to 200 Degrees C). These elbows are intended for use in applications where pressurized tubing and connection points require a tight radius bend and size transition to accommodate the installation of piping in limited space. Not suitable for use with Oil/Fuel.

Vibrant Performance Aramid Reinforced Silicone 90° Transition Elbows feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75° F to 392° F (-60° C to 200° C). These elbows are intended for use in applications where pressurized tubing and connection points require a tight radius bend and size transition to accommodate the installation of piping in limited space. Not suitable for use with Oil/Fuel.

Vibrant Performance Aramid Reinforced Silicone 90 Degree Transition Elbows feature Long leg lengths and a 1-to-1 bend ratio. This elbow is intended for use in applications where pressurized tubing and connection points require a tight radius bend and size transition to accommodate the installation of piping in limited space. Our Transition Elbows are commonly found off of turbo compressor housings, intercooler end tanks, and charge pipe assemblies.