One 250 ml can is sufficient for minimum 3 liters(0.8 gal.) to maximum 4.5 liters(1.2 gal.) of oil. Add Motorbike Engine Flush to the motor oil atoperating temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Motorbike Engine Flush is compatible with all commercially available motor oils. Suitable for use on motorbikes with wet clutches.; Contents (250 mL) is sufficient for 3?4.5 Liters (0.6 gal. to 1.2 gal.) oil. Add contents to warm motor oil before the oil change. After adding allow the engine to idle for 10 minutes, during the application pull in and hold clutch lever multiple times for a few seconds. Then drain the oil and change the filter.
Cleans and flushes the motor oil system of 4-stroke motorcycles engines.The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used.
Ahighly effective formulation for quick and safe removal of deposits from engines before an oil change. A clean engine will provide less wear, lower emissions and improved performance while preventing premature oil degradation.
