Products Details


Part Number: 1064424F


SKU: 1064424FBKJX Categories: ,
  • Extra Info:

  • Machined center support
    Machined intermediate piston
    Machined low/reverse pressure plate
    Machined rear ring gear hub
    Added lube circuits to OD planet
    Added lube and support to output and intermediate shafts
    Replaced all aluminum planetaries with steel
    Drilled and tapped direct and intermediate feeds to prevent leaks at case
    Re-programmed accumulator body
    Full shift kit with line mod valve to increase pressures
    Accumulator body enhanced oil flow
    Increased cooler pressure
    Increased pressure to converter
    Creates positive clutch application
    Created lube circuit for towing in overdrive
    1990-2003 include auxiliary frame mounted full flow filter kit
    Clutch Count: COAST CLUTCH 2
    Clutch Count: FORWARD 5
    Clutch Count: DIRECT 5
    Clutch Count: LOW REVERSE 7
    Clutch Count: INTERMEDIATE 4
    Clutch Count: OVERDRIVE 4
    Pan adds 6qt extra oil capacity
    Fully rollerized geartrain
    Tighter clutch packs that provide a quicker shift
    30%-40% more clutch material with additional steels
    Improved internal lubrication by adding high power boost valves
    Reworked front pump
    Improved bearing designs
    Upgrade supports
    Upgraded sprags
    Sure-loc snap rings
    Solenoids hard wiring providing high temperature resistance
    Increase the durability of your drivetrain
    Revised oil circuits
    Handles up to 300% more power and torque than the stock transmission
    Extra clutches and stronger internals
    BD rigid aluminum heavy duty transmission pan
    Pan reduces case flex
    Pan reduces internal oil leakage
    Pan heat-dissipating fins keep temperature down
    Pan magnetic drain plug
    Not warranted for Race or Sled Pull use
    Each transmission is dyno tested
    150,000 Miles
    24,000 miles
    No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.
    Add “PTO” to part number for PTO provision (i.e. 1064444FPTO or 1064444FPTOLR)
    BD torque converter must be installed at the time of installation of the transmission – use of a 3rd party or OE converter will invalidate the transmission warranty