Extra Info:

Load Controller (25850) by Air Lift?. LoadController Compact provides one-touch control of your air springs using a small easy-to-mount gauge. Never search for a gas station with a working compressor again!

Notes: Never exceed manufacturer?s recommended Gross Vehicle Weight Rating.

Load Controller (25850) by Air Lift?. LoadController Compact provides one-touch control of your air springs using a small easy-to-mount gauge. Never search for a gas station with a working compressor again!

Notes: Never exceed manufacturer?s recommended Gross Vehicle Weight Rating.

Gallery
FAQ
About us
Specifications:
Compressor: With Standard-duty air compressor
Type: With Equal Air Spring Inflation
Features:
Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each other
Standart strength compressors are recomended for intermittent weekend use
Adjustment of spring pressure is manually controlled from inside your vehicle
Pressure gauge with built-in control switches can be installed in the included mounting cup or any 2 1/8th? hole on your instrument cluster
Air compressor pump mounts permanently to the vehicle frame to supply air pressure anywhere
Emergency trigger automatically re-inflates springs if pressure reaches a critical minimum inflation point
All air line couplings are easy and convenient to connect or disconnect
Compatible with any brand of air springs (not included in kit)
2-year manufacturer limited warranty
Manufactured in the United States
Includes:
(1) 3/16″ Terminal, FSpd (Part Number 24524)
(1) ATC/ATO Fuse Tap In 1/4 (Part Number 24542)
(1) Analog Single Gauge (Part Number 25194)
(1) FSpd Terminal, 12 GA (Part Number 24595)
(1) Fuse Holder (ATC/ATO) (Part Number 24539)
(1) Fuse, AGC Tap In (Part Number 24543)
(1) Gauge Mounting Kit (Part Number 25196)
(1) Grommet (Part Number 10463)
(1) Harness, Single Analog Gauge (Part Number 26512)
(1) Heavy Duty Compressor (Part Number 16092)
(1) Mini Fuse Adapter (Part Number 24561)
(1) Sensor, 5 PSI (Part Number 24558)
(1) Spade Fuse, 15 Amp (ATC) (Part Number 24652)
(1) Standard Duty Compressor (Part Number 16060)
(1) Tee, 1/8 FNPT X 1/4 PTC (Part Number 21952)
(2) 18X1″ Tek Screw (Part Number 17441)
(2) Center Butt, 12-10 GA Shrink Tube (Part Number 24752)
(25) 1/4″ Air Line, “DOT” (Part Number 20946)
(3) Tee Union 1/4″ X 1/4″ PTC (Part Number 21838)
(4) 1/4″ Terminal, FSpd 16 GA (Part Number 24594)
(5) 8″ Zip Tie (Part Number 10466)
With the touch of a button, control the pressure in your air springs from the cab of your vehicle. This is extremely convenient for changes in load or road conditions. If you?ve just hooked up your RV, trailer or put a load in the bed of your truck, you can inflate your air springs to the desired pressure right from the cab. No more searching for a gas station compressor to find air!

The gauge mounts in your vehicle?s cab and operates regardless of whether you are parked or on the road. The user-friendly gauge has easy-to-use inflate and deflate buttons to let you quickly inflate or deflate your vehicle?s air spring pressure. Mount in the included mounting cup, flush mount or insert into any 2 1/8 inch gauge pod.

Instead of searching for a gas station with a working compressor to fill your air springs, Air Lift offers LoadController compressors that mount permanently to the frame of your vehicle and supply air pressure wherever you travel. If you would benefit from the ability to set different pressures in left and right side springs, choose ?Dual-path? design compressors that let you control each one individually. If lower cost is preferred, ?Single-path? versions feature one control channel that operates both springs together equally at the same rate. Whichever you choose, you?ll be able to select either one in standard-strength for intermittent weekend use or in heavy-duty strength for daily and commercial use.

LoadController air compressors are adjustable from inside your vehicle at the touch of a button. They do not include sensors, so the height of the air springs is determined solely by the user, not automatically by the system. Should air pressure in either of the springs reach a critical minimum inflation point, LoadController air compressors will kick on automatically to correct the condition. The pressure gauge with built-in control switches mounts anywhere in your vehicle using an included bracket, or it can be inserted into any 2 1/8th?hole in your instrument cluster. All kits come with an air compressor, wiring harness, air lines, gauge/control, and all related hardware necessary for installation. Air Lift proudly produces LoadController air compressor kits in the United States, and backs all components with a 2-year warranty against failure due to manufacturing defects.