Extra Info:

LoadLifter 7500XL? Rear Air Spring Kit (57538) by Air Lift?. This heavy duty air spring system provides a solution for vehicle squat, which can result from carrying heavy loads. By properly distributing weight to all four wheels, the LoadLifter 7500 XL maximizes vehicle stability while eliminating unsafe and uncomfortable driving conditions such as poor braking, unresponsive steering, trailer sway, body roll and bottoming out. This kit also smoothes out the formerly rough ride that could result from heavy duty towing and hauling.

Notes:
Requires drilling for installation
Never exceed manufacturer?s recommended Gross Vehicle Weight Rating
Specifications:
Load Capacity: 7500 lbs
Features:
7,500 pounds of load- leveling capacity
For owners of ?- and 1-ton pickups that tow or haul heavy loads like slide-in campers
This kit provides an unbeatable combination of adjustability and ride quality
Air adjustable from 5 to 100 PSI
Air Lift-exclusive upper and lower roll plates protect the air springs from possible abrasion and increase load capacity up to 10%
Most kits use the existing holes in the vehicle?s frame for a bolt-on installation
Easy to install with illustrated installation manual
End caps made of ultra high-strength, corrosion-proof, nylon composite which is as strong as steel but weighs less and will not rust
Kits are compatible with most 5th wheel and gooseneck hitches
Includes:
(1) 3/8″-16 Serrated flange lock nut (Part Number 18422)
(1) Air line assembly (Part Number 20086)
(1) Emergency brake cable bracket (Part Number 26333)
(1) Upper bracket, left (Part Number 07804)
(1) Upper bracket, right (Part Number 07905)
(12) 3/8″ Flat washer (Part Number 18444)
(12) 3/8″-16 Nylon lock nut (Part Number 18435)
(2) 5/16″ Rubber washer (Part Number 21234)
(2) 90? Swivel fitting (Part Number 21830)
(2) Air spring (Part Number 58115)
(2) Clamp bar (Part Number 01851)
(2) Lower bracket (Part Number 03702)
(2) Star washer (Part Number 18411)
(2) Valve cap (Part Number 21230)
(3) M8-1.25 x 10 Hex cap screw (Part Number 17449)
(4) 3/8″ Self-tapping screws (Part Number 17129)
(4) 3/8″-16 x 3.5″ Carriage bolts (Part Number 17142)
(4) 5/16″ Hex nut (Part Number 21233)
(4) Roll plate (Part Number 11897)
(4) U-bolt (Part Number 11046)
(5) M8 Flat washer (Part Number 18501)
(6) Zip ties (Part Number 10466)
(8) 3/8″-24 x .75″ Flat head screw (Part Number 17215)
The suspension of any pickup, van, or mobile home that?s weighed down by heavy cargo, permanently affixed equipment, or a trailer is compromised because the rear springs are crushed down to a height they cannot recover from. Ride quality is reduced, and the front of your vehicle points upward. A rear end that is weighed down literally lifts weight off your front wheels, reducing the amount of traction you have for steering and reducing grip the tires have on the road when you need it in fast braking. After enough time, weighed-down springs sag permanently and the effect becomes even worse.

Whether you?ve got a compact pickup truck or large mobile home, Air Lift offers Air Spring support kits that are tailored to your individual needs. For smaller vehicles with coil springs, the Air Lift? LoadLifter 7500XL air springs mount inside the center of your vehicle?s original springs to raise 1,000 pounds to proper ride height. For larger pickups and vans with leaf springs, Air Lift?s RideCONTROLL kit mounts a set of air springs between leaf spring and vehicle frame on each side, adding 2,000 pounds of load leveling capacity. And for commercial vehicles based on light truck or van platforms with heavy hauling needs, the LoadLifter5000 Air Springs supports a maximum of 5,000 pounds per axle. Kits come with necessary brackets and hardware for easy mounting along with easy-connect air lines for manual inflation. While air compressors are not included in these kits, Air Lift also has a selection of pumps that allow power adjustment of your springs automatically, or with the touch of a button.